Logo

 

 

Buggy RC

Buggy Elettrico

» BUGGY 1/18 SKARK RTR - PRONTO CORSA  

 

Euro 169,00 - 19,53%

Dotazione : radio - batteria , caricabatteria 220V e 8 batterie per la radio - sterzo full-size servo - motore 380 - cuscinetti a sfera a basso attrito - Giunti universali anteriore e posteriore pignone 16 denti in acciaio - -


 

Disponibilitą : NO => Euro 136,00

Quantitą esamina il carrello

» SPRINT SPEED CONTROL - REGOLATORE X MOTORI DA 20 A 27 SPIRE  

 

Euro 58,00 - 34,66%

SPRINT ESC W/REVERSE
Variatore elettronico MOS FET
Marcia avanti-indietro per motori da 20 a 27 spire.
N.ro celle 6-7 ( 7,2 / 8,4 Volt )
Max corr.cost. 128 Amp. marcia avanti
Dimensioni mm 42 x 38 x16
Peso gr. 60
BEC Voltaggio/Amp 5.0 Volts/1.0 Amps
Resit.Int. 0.007 Ohm Marcia Avanti
Specifico per Motori 20-27 spire

 

Disponibilitą : NO => Euro 37,90

Quantitą esamina il carrello

» MINI INFERNO 2 - SCALA 1:16  

 

lunghezza: 270 mm; larghezza: 173 mm; altezza: 100 mm; carreggiata (a/p): 148 mm; passo: 176 mm; gomme (a/p.): 64x25 mm; peso: 800 g; motore: 380;

 

Disponibilitą : NO => Euro 145,00

Quantitą esamina il carrello

» RACING PACK LIPO - 7,4 VOLT - 3700 mA - HARD CASE  

 

Euro 52,00 - 28,85%

Misure : Lungh. 13,7 x 4,6 x 2 cm •peso: 225 g

 

Disponibilitą : NO => Euro 37,00

Quantitą esamina il carrello

» BUGGY 1/10 - HOTFIRE BRUSHLESS - SCALA 1/10 - RTR COMPLETO DI RADIO 2,4 GHZ - BATTERIA DA 3200 mA - CARICABATTERIA - COMPLETO DI SIMULATORE E CAVO USB  

 

Euro 275,00 - 13,82%

DOTAZIONE - Motore e Regolatore Brushless - Batteria 7,2 Volt 3200mAh + Caricabatteria - 4WD - Cuscinetti a sfera - Sospensioni Regolabili - Ammortizzatori a Olio - Regolatore brushless con ventola - Buggy rc Brushless Motor - Servo dello Sterzo da 9 Kg - Radio 2,4 Ghz completa di ricevente - Completo di Simulatore e cavo USB -

 

Disponibilitą : NO => Euro 237,00

Quantitą esamina il carrello

» XERUN - 80 A - SD BRUSHLESS FOR 1/8 - 1/10 CAR-   COMPETION RACE - 2-4 CELLE LIPO

 

1.1 Output: Continuous current 80A, burst current 380A.
1.2 Input: 6-12 cells NiMH/NiCd or 2-4 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor:
When working with 4 cells Lipo: >= 6.0T (KV<=2400)
The above T number is the value of a 4274 sized motor (Diameter=42mm, Length=74mm)
1.7 Suitable Car: 1/8 Buggy / Truggy.
1.8 Size: 58mm(L) * 46.5mm(W) * 35mm(H).
1.9 Weight: 105g(Without wires)

 

Disponibilitą : NO => Euro 69,00

Quantitą esamina il carrello

» MOTORE MAGNUM POWER - PER BUGGY / TOURING 1/8  

 

Motore brushless ad alte prestazioni
specifico per buggy 1/8 - Touring 1/8

Alimentazione : 2 - 6 celle Lipo
Giri : 2060 Kv
Potenza : 2590 W

Lunghezza 65 mm - Larghezza 45 mm
Peso 455 gr - Albero da 5 mm

 

Disponibilitą : NO => Euro 99,00

Quantitą esamina il carrello

» MOTORE TAMIYA DA COMPETIZIONE   RZ 23 SPIRE

 

Euro 59,00 - 33,9%

Tamiya Motore Elettrico Super Stock 23 Spire

Motore 23 spire * voltaggio: 7.2V * R.P.M. : 27,500rpm (7.2V) * Torque at best efficiency: 500g-cm (7.2V)

 

Disponibilitą : NO => Euro 39,00

Quantitą esamina il carrello

» TEAM ORION VORTEX - BRUSHLESS 18 T Carbon   PER BUGGY 1/10 - TURING 1/10

 

Euro 66,00 - 45,45%

Specifiche tecniche :
Tensione in ingresso : 2-3 celle LiPo
Max corrente continua : 48 A - Picco corrente: 68 A
Resistenza interna : 0.0171 Ohm - Corrente a vuoto : 1,8 A
Spire : 18T - - RPM / V: 3000 KV - - Peso: 170g
Diametro Albero: Ø 3.175 millimetri - Dimensioni: 46,4 x36,1mm

 

Disponibilitą : NO => Euro 36,00

Quantitą esamina il carrello

» TEAM ORION VORTEX - BRUSHLESS 19 T Carbon   PER BUGGY 1/10 - TURING 1/10

 

Euro 66,00 - 45,45%

Specifiche tecniche :
Tensione in ingresso : 2-3 celle LiPo
Max corrente continua : 50A - Picco corrente: 70A
Resistenza interna : 0.023 Ohm - Corrente a vuoto : 1,6 A
Spire : 19T - - RPM / V: 2.840KV - - Peso: 170g
Diametro Albero: Ø 3.175 millimetri - Dimensioni: 46,4 x36,1mm

 

Disponibilitą : NO => Euro 36,00

Quantitą esamina il carrello

» BEC 3 AMPERE - SUPPORTA TENSIONE DI INGRESSO DA 2 A 5 CELLE LIPO  

 

Misura 41,6 x16, 6x7mm, 11g di peso
( foto indicativa )

 

Disponibilitą : NO => Euro 16,00

Quantitą esamina il carrello

» BEC 3 AMPERE - SUPPORTA TENSIONE DI INGRESSO DA 3 A 10 CELLE LIPO  

 

Dimensioni: 48,0 x 27,0 x 9,0 millimetri
Peso: 30 g

( foto possibile configurazione di montaggio, altri componenti non presenti nell'articolo )

 

Disponibilitą : NO => Euro 34,00

Quantitą esamina il carrello

» XERUN 2250   MOTORE BRUSHLESS PER BUGGY 1 : 8 o MONSTER - 2250 GIRI X VOLT - ALIMENTAZIONE 4 CELLE LIPO

 

Motore brushless ad alte prestazioni
specifico per buggy 1/8 - Touring 1/8

Alimentazione : 2 - 6 celle Lipo
Giri : 2060 Kv
Potenza : 2590 W

Lunghezza 65 mm - Larghezza 45 mm
Peso 455 gr - Albero da 5 mm

 

Disponibilitą : NO => Euro 129,00

Quantitą esamina il carrello

» PIGNONE PER MOTORE BRUSHLESS CAR   ALBERO 5 mm - 13 DENTI - PASSO M1

 

1 PEZZO

 

Disponibilitą : NO => Euro 5,70

Quantitą esamina il carrello

» PIGNONE PER MOTORE BRUSHLESS CAR  ALBERO 5 mm - 15 DENTI - PASSO M1

 

Misura 41,6 x16, 6x7mm, 11g di peso
( foto indicativa )

 

Disponibilitą : NO => Euro 5,70

Quantitą esamina il carrello

 

Pagine: 1 - 2

Torna su ^